Commercial buildings, utility rooms and remote plant areas may contain electricity, water, gas and heat meters, environmental sensors and PLCs. The problem is often not a failed device but fragmented connectivity. An industrial router provides a managed path between field networks and a remote platform.
Why building data often remains fragmented
Commercial buildings, utility rooms and remote plant areas may contain electricity, water, gas and heat meters, environmental sensors and PLCs. The problem is often not a failed device but fragmented connectivity. An industrial router provides a managed path between field networks and a remote platform.
Where TR-100 fits
Tespro TR-100 is positioned for basic industrial connectivity and field-device access. Current Tespro information lists 2G/3G/4G, one WAN and one LAN, with RS485, RS232 or CAN available depending on project configuration. It is best viewed as a connectivity layer rather than a replacement for a BMS, SCADA or a full edge-computing platform.
Case: unified monitoring across commercial buildings
Tespro publishes a case involving a regional facility-management company operating commercial buildings, utility rooms and distributed equipment sites. Smart meters, water/gas/heat meters, environmental sensors and PLC-based equipment were connected through TR-100 units and reported to the customer cloud over 4G or Ethernet. The project kept the field assets in place and focused on creating a consistent remote communication layer.
What other projects can learn from the case
When a customer already has an energy or building-management platform, the key gap may simply be reliable field access. Adding an industrial router can be more practical than replacing meters and controllers. Where the project also requires protocol normalization, tag mapping or edge logic, a Tespro TG industrial gateway should be considered instead.
Frequently Asked Questions
Q: Is TR-100 only for electricity meters?
A: No. The published case also involves multiple utility meters, environmental sensors and PLC equipment. Exact interfaces and protocols should still be checked by configuration.
Q: Does an industrial router replace a BMS?
A: No. The router provides connectivity and remote communication; the BMS remains responsible for building logic, visualization and management.
Q: When is a gateway a better fit?
A: Use an industrial gateway when the site needs protocol parsing, data modeling, Modbus-to-MQTT/OPC UA conversion or local edge processing.
